As an Amazon Associate I earn from qualifying purchases.
I got these 15×6.00-6 front tires for my 1991 Craftsman riding lawn mower. This is an unboxing and pre-install look, not a long-term performance review. I aired up one tire and inspected it before putting it on the mower.
The seller describes the product as a two-pack of pneumatic tire-and-wheel assemblies with a 4-ply rating and 3/4-inch bushings. The listing names Craftsman, John Deere, and Husqvarna riding mowers as compatible applications, but it also advises buyers to compare the listed dimensions and original tire size before ordering. I have not verified the fit on those other brands.
My first impression was that the tread looked good. The wheels are not keyed or driven, so they are intended for a free-rolling position such as the front of a compatible riding mower. According to the seller, each tire has an outer diameter of around 14.2 inches and a section width of 5.3 inches. The listed rim diameter is around 6 inches, and the hub is about 3 inches long. The listing also gives a maximum load capacity of 400 pounds and a maximum pressure of 30 PSI.
The tire’s height was my main concern during the inspection. Although it is labeled 15×6.00-6, I estimated that it stood about 14 to 14.5 inches tall in the video. I had inflated it to around 20 PSI, not the listed maximum of 30 PSI, and I was not sure whether that measurement was normal for this tire size. The seller’s stated outer diameter of around 14.2 inches is consistent with what I saw, but it is still important to compare the measurements with the mower’s original tires.
I also noticed that the replacement looked slightly narrower than the tire currently on my mower. Because I had not installed it, I could not confirm whether that difference would affect steering, deck height, traction, or cut quality.
I liked the location of the grease fitting. It was accessible from the visible side of the wheel instead of being tucked behind it. That should be more convenient than a fitting that requires reaching under the tractor, although I had not used it for maintenance when I filmed the video.
The tire aired up during this initial check, but I did not conduct a longer leak test or operate the mower with it installed. Based on the tread, wheel configuration, and accessible grease fitting, my pre-install impression was positive. These appeared to be an inexpensive replacement option for my tractor, but fit and performance still needed to be confirmed after installation.
